Back to top
08037695757
Send SMS Send Inquiry


1/2'' Water Flow Sensor Or Fluid Flowmeter Control Switch For Arduino Raspberry And Other Mcu Model-YF-S201

1/2'' Water Flow Sensor Or Fluid Flowmeter Control Switch For Arduino Raspberry And Other Mcu Model-YF-S201

185 INR/Piece

Product Details:

X

Price And Quantity

  • 1 Piece
  • 185 INR/Piece

Product Description

Description:

The water flow sensor consists of a plastic valve body, a water rotor, and a hall-effect sensor. When water flows through the rotor, the rotor rolls. Its speed changes with a different rate of flow. The hall-effect sensor outputs the corresponding pulse signal. This one is suitable to detect flow in a water dispensers or coffee machines. We have a comprehensive line of water flow sensors in different diameters. Check them out to find the one that meets your need most.

Specification:

Model: YF-S201

Sensor Type: Hall effect

Working Voltage: 5 to 18V DC (min tested working voltage 4.5V)

Max current draw: 15mA  5V

Output Type: 5V TTL

Working Flow Rate: 1 to 30 Liters/Minute

Working Temperature range: -25 to +80 dig c

Working Humidity Range: 35%-80% RH

Accuracy: +-10%

Maximum water pressure: 2.0 MPa

Output duty cycle: 50% +-10%

Output rise time: 0.04us

Output fall time: 0.18us

Flow rate pulse characteristics: Frequency (Hz) = 7.5 * Flow rate (L/min)

Pulses per Liter: 450

Durability: minimum 300,000 cycles

Features:


1/2 inch nominal pipe connections, 0.78 inch outer diameter, 1/2 inch of thread.

Compact, Easy to Install

High Sealing Performance

High-Quality Hall Effect Sensor

Connection:

Red wire: +5V

Black wire: GND

Yellow wire: PWM output

Enter Buying Requirement Details
Email Id
Mobile number

Other Products in 'Sensor Modules' category